my Volkswagen Golf MK7 (2015-2019) is shaking when I drive over 60 mph what’s wrong

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

542 words

Problem Statement

Learn how to diagnose and fix shaking issues in your Volkswagen Golf MK7 when driving over 60 mph. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely raised on jack stands before working underneath.
•Always wear safety glasses when working with tires and suspension components.

Symptoms

•Vibrations felt through the steering wheel or floorboard
•Increased steering wheel wobble at high speeds
•Uneven tire wear visible on tire tread
•Vehicle pulling to one side during driving
•Potential noise coming from the wheels or suspension

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer specifications.
2
Check for visible damage to tires (e.g., bulges, cuts, uneven wear).
3
Perform a wheel balance check on all four tires.
4
Inspect suspension components for wear or damage (e.g., control arms, bushings).
5
Check for proper wheel alignment using an alignment machine.
6
Test drive the vehicle to isolate the vibration to specific speeds or conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Lug wrench
•Wheel balancing machine
•Torque wrench
•Socket set
•Alignment machine

Parts Required

•New tires (if necessary)
•Suspension components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer specifications.
2
Check for visible damage to tires (e.g., bulges, cuts, uneven wear).
3
Perform a wheel balance check on all four tires.
4
Inspect suspension components for wear or damage (e.g., control arms, bushings).
5
Check for proper wheel alignment using an alignment machine.
6
Test drive the vehicle to isolate the vibration to specific speeds or conditions.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and turn off the ignition.
Use wheel chocks to stabilize the vehicle.

2. Tire Inspection and Replacement

Sub-steps:
1. Remove the hubcaps or wheel covers if applicable.
2. Loosen lug nuts on all wheels slightly before raising the vehicle.
3. Use a jack to lift the vehicle and secure it with jack stands.
4. Remove the wheels and inspect for visible damage or uneven wear.
5. If tires are damaged or excessively worn, replace them with new tires.

Tools Required:

Tire pressure gauge
Jack and jack stands
Lug wrench

3. Wheel Balancing

Sub-steps:
1. Mount the wheels on a wheel balancing machine.
2. Follow the machine instructions to balance each wheel.
3. Add weights as necessary to achieve balance.
4. Reinstall the balanced wheels onto the vehicle.

Tools Required:

Wheel balancing machine

4. Suspension Inspection and Repair

Sub-steps:
1. Visually inspect control arms, bushings, and other suspension components for wear or cracks.
2. Replace any damaged components with OEM or high-quality aftermarket parts.
3. Tighten all bolts to manufacturer specifications using a torque wrench.

Tools Required:

Torque wrench
Socket set

5. Wheel Alignment

Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Follow the technician's recommendations for adjustments.
3. Ensure alignment is within specifications.

Tools Required:

Alignment machine (if performing alignment in-house)