my Volkswagen Golf MK7 (2015-2019) is making a knocking noise, what should I do?

Volkswagen Golf MK7 (2015-2019)

Error Codes

3-5 hours

Time

medium

Difficulty

medium

Severity

3 min read

600 words

Problem Statement

Learn how to diagnose and fix knocking noise in Volkswagen Golf MK7 (2015-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery when working on electrical components or engine mounts.

Symptoms

•Knocking noise during acceleration or deceleration
•Noise increases with speed
•Vibration felt through the steering wheel or floor
•Unusual tire wear patterns
•Check engine light may be illuminated

Diagnostic Steps

1
Inspect the suspension components for wear or damage, including control arms and bushings.
2
Check for loose or damaged engine mounts.
3
Perform a visual inspection of the drivetrain components, including the CV joints and axles.
4
Test drive the vehicle to identify when the noise occurs (e.g., during turns, bumps, or acceleration).
5
Scan the vehicle's OBD-II system for any error codes that may indicate mechanical issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Hydraulic jack
•Jack stands
•Socket set
•Torque wrench
•Pry bar
•Visual inspection tools (flashlight)

Parts Required

•Control arms and bushings (if worn)
•Engine mounts (if damaged)
•CV joints or axles (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components for wear or damage, including control arms and bushings.
2
Check for loose or damaged engine mounts.
3
Perform a visual inspection of the drivetrain components, including the CV joints and axles.
4
Test drive the vehicle to identify when the noise occurs (e.g., during turns, bumps, or acceleration).
5
Scan the vehicle's OBD-II system for any error codes that may indicate mechanical issues.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface, and engage the parking brake.

2. Inspect and Replace Suspension Components

Lift the Vehicle
- Use a hydraulic jack to lift the vehicle and secure it with jack stands.
- Tools required: Hydraulic jack, jack stands.
Inspect Suspension Components
- Visually inspect the control arms, struts, and bushings for any signs of wear or damage.
- Use a pry bar to check for play in the bushings and joints.
Replace Worn Components
- If any components are damaged, remove the old parts using a socket set and replace them with new ones.
- Torque specifications should be followed as per the service manual (typically around 50-70 ft-lbs for control arm bolts).
- Tools required: Socket set, torque wrench, pry bar.

3. Check and Replace Engine Mounts

Inspect Engine Mounts
- Visually check the engine mounts for cracks or separation.
- Tools required: Visual inspection tools (flashlight).
Remove and Replace Engine Mounts
- If damaged, support the engine with a jack and remove the engine mount bolts.
- Replace with new engine mounts and torque the bolts to manufacturer specifications.
- Tools required: Socket set, engine hoist (if necessary), torque wrench.

4. Inspect Drivetrain Components

Examine CV Joints and Axles
- Check for any signs of wear on the CV joints, including torn boots or excessive grease leakage.
- Tools required: Visual inspection tools (flashlight).
Replace Damaged CV Joints or Axles
- If any components are damaged, remove the axle nut and disconnect the CV joint from the hub.
- Replace with new components and torque the axle nut to manufacturer specifications (usually around 150 ft-lbs).
- Tools required: Socket set, torque wrench, breaker bar.