my Volkswagen Golf MK7 (2015-2019) has an oil consumption issue, what can be done?

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

586 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix oil consumption issues in Volkswagen Golf MK7 (2015-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before performing any work on it.

Symptoms

•Check engine light illuminated
•Blue smoke from the exhaust
•Frequent need to add oil
•Engine misfiring or rough idling
•Increased engine noise
•Oil leaks under the vehicle

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to check for error codes.
2
Inspect the oil level and condition using the dipstick to determine the amount of oil consumed.
3
Perform a visual inspection of the engine for signs of leaks or oil pooling.
4
Check the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Conduct a compression test on each cylinder to assess engine health.
6
Inspect the turbocharger (if equipped) for oil leaks or excessive play in the bearings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Pliers
•Oil filter wrench
•Compression tester
•Engine degreaser
•Oil catch pan

Parts Required

•PCV valve
•Valve cover gasket (if applicable)
•Oil filter
•Engine oil (manufacturer recommended)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to check for error codes.
2
Inspect the oil level and condition using the dipstick to determine the amount of oil consumed.
3
Perform a visual inspection of the engine for signs of leaks or oil pooling.
4
Check the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.
5
Conduct a compression test on each cylinder to assess engine health.
6
Inspect the turbocharger (if equipped) for oil leaks or excessive play in the bearings.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the engine is cool and parked on a level surface.
Disconnect the negative battery terminal to prevent electrical issues.

2. Replace PCV Valve

Tools Required: Socket set, pliers, oil catch pan.
Locate the PCV valve and remove any hoses connected to it.
Use pliers to detach the PCV valve from its housing.
Install the new PCV valve by reversing the removal steps.
Reconnect all hoses securely.

3. Address Oil Leaks

Tools Required: Socket set, wrench set, engine degreaser.
Identify the source of any leaks (such as valve cover gasket, oil pan gasket, or seals).
Remove the affected components (e.g., valve cover).
Clean the surfaces thoroughly with engine degreaser.
Replace gaskets or seals as necessary with new parts.
Reassemble the components and ensure proper torque specifications are followed.

4. Engine Oil Change

Tools Required: Oil filter wrench, socket set, oil catch pan.
Drain the old engine oil into the catch pan.
Replace the oil filter using the oil filter wrench.
Refill the engine with manufacturer-recommended oil type and amount.
Start the engine and check for leaks around the oil filter and drain plug.

5. Compression Test (if necessary)

Tools Required: Compression tester, spark plug socket.
Remove spark plugs and connect the compression tester to each cylinder.
Crank the engine and record the compression readings.
Compare readings to manufacturer specifications to determine if any cylinders are significantly low.