FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK6 (2009-2014) wipers not working how do I troubleshoot - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7 (2015-2019)/my Volkswagen Golf MK6 (2009-2014) wipers not working how do I troubleshoot

my Volkswagen Golf MK6 (2009-2014) wipers not working how do I troubleshoot

Volkswagen Golf MK7 (2015-2019)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
530 words

Problem Statement

Learn how to troubleshoot and fix wipers not working on Volkswagen Golf MK6 (2009-2014). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow wipers to cool down to avoid burns if they were previously in use.

Symptoms

  • •Wipers do not operate when activated
  • •Wiper motor does not make any noise
  • •Wiper fuse is blown
  • •Wiper stalk feels loose or unresponsive
  • •Wipers stuck in one position
  • •No water spray from windshield washer jets

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Screwdriver set
  • •Fuse puller
  • •Electrical tape

Parts Required

  • •Wiper fuse (if blown)
  • •Wiper switch (if faulty)
  • •Wiper motor (if defective)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety during repairs.
2. Replace Wiper Fuse
  • Locate the fuse box, typically under the dash or in the engine compartment.
  • Remove the wiper fuse using a fuse puller or needle-nose pliers.
  • Replace with a new fuse of the same amperage (refer to the owner's manual for specifications).
  • Reconnect the battery terminal and test wipers.
3. Repair or Replace Wiper Switch
  • Remove the steering column covers using a screwdriver.
  • Disconnect the wiring harness from the wiper switch.
  • Use a multimeter to test continuity on the switch.
  • If faulty, replace with a new wiper switch, reconnect the wiring, and reassemble the steering column.
4. Test and Replace Wiper Motor
  • If no voltage was detected at the motor, remove the wiper arm using a socket set.
  • Disconnect the wiring harness from the wiper motor.
  • Test the motor directly by connecting it to a power source.
  • If the motor does not operate, replace it with a new one, ensuring proper alignment and connection.
5. Inspect and Repair Wiring
  • Check the wiring harness for any exposed wires or damage.
  • Repair any broken wires with electrical tape or by soldering.
  • Ensure all connections are secure and free from corrosion.
6. Test the System
  • Reconnect the battery terminal.
  • Activate the wiper system to confirm that all functions operate correctly.