FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK6 (2009-2014) brake light is on but brakes are fine what could it be - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7 (2015-2019)/my Volkswagen Golf MK6 (2009-2014) brake light is on but brakes are fine what could it be

my Volkswagen Golf MK6 (2009-2014) brake light is on but brakes are fine what could it be

Volkswagen Golf MK7 (2015-2019)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
509 words

Problem Statement

Learn how to diagnose and fix the brake light issue on your 2009-2014 Volkswagen Golf MK6. Step-by-step guide with symptoms and solutions.

Affected Component
Brakes
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Ensure the vehicle is secure and won't roll while working on it.

Symptoms

  • •Brake light warning illuminated on the dashboard
  • •No changes in braking performance
  • •Brake fluid level is normal
  • •No unusual noises while braking
  • •No error codes present when scanned

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdriver set
  • •Electrical contact cleaner

Parts Required

  • •Brake light switch (if faulty)
  • •Brake light bulbs (if burnt out)

Additional Information

Affected Component
Brakes
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
3 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect Brake Light Switch
  • Locate the brake light switch under the dashboard near the brake pedal.
  • Remove the switch connector by pressing the release tab.
  • Test the switch with a multimeter by checking for continuity when the pedal is pressed.
    • Tools Required: Multimeter
    • Safety Warning: Ensure the battery is disconnected before working on electrical components.
  • If defective, replace the brake light switch.
3. Check Wiring and Connectors
  • Visually inspect the wiring harness connected to the brake light switch for any signs of wear or damage.
  • Clean any corrosion on connectors with electrical contact cleaner.
  • Repair or replace any damaged wiring as necessary.
4. Test Brake Light Bulbs
  • Access the rear tail light assembly by removing any necessary covers or fasteners.
  • Remove the brake light bulb and visually inspect for any broken filaments or signs of damage.
  • Replace with a new bulb if necessary.
    • Parts Required: Brake light bulb (if defective)
5. Reassemble and Test
  • Reconnect all components and ensure everything is securely fastened.
  • Reconnect the battery.
  • Start the vehicle and check if the brake light warning is still illuminated.