FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf MK6 (2009-2014) AC is not blowing cold air what's wrong - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7 (2015-2019)/my Volkswagen Golf MK6 (2009-2014) AC is not blowing cold air what's wrong

my Volkswagen Golf MK6 (2009-2014) AC is not blowing cold air what's wrong

Volkswagen Golf MK7 (2015-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
586 words

Problem Statement

Learn how to diagnose and fix AC not blowing cold air in Volkswagen Golf MK6. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
HVAC
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always wear safety glasses and gloves when handling refrigerants.
  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before opening the AC system.

Symptoms

  • •AC system blowing warm air
  • •AC compressor not engaging
  • •Unusual noises from the AC system
  • •AC system cycling on and off frequently
  • •Foul odor or musty smell from the vents
  • •Fogging of the windshield on the inside when AC is on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Manifold gauge set
  • •Multimeter
  • •Socket set
  • •Vacuum pump

Parts Required

  • •Refrigerant (R-134a)
  • •AC compressor (if needed)
  • •Cabin air filter (if needed)

Additional Information

Affected Component
HVAC
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface with the engine off.
  • Disconnect the battery to prevent any electrical shorts.
2. Recharge the AC System
  • Tools Required: Manifold gauge set, refrigerant (R-134a), vacuum pump.
  • Hook up the manifold gauge set to the low and high pressure ports.
  • Start the vehicle and turn the AC to the maximum setting.
  • Check the pressure readings; if low, proceed to recharge.
  • Use the vacuum pump to evacuate the system for at least 30 minutes to remove moisture and air.
  • Slowly add refrigerant until system pressure matches specifications (usually around 30-40 psi on the low side).
3. Repair or Replace Components
  • If the compressor is faulty:
    • Remove the serpentine belt using a socket wrench.
    • Unbolt and disconnect the AC compressor from the mounting bracket.
    • Install the new compressor, ensuring all seals are replaced.
    • Reinstall the serpentine belt and reconnect any electrical connectors.
  • If the cabin air filter is clogged:
    • Access the filter compartment, usually behind the glove box.
    • Remove the old filter and install a new one.
4. Test the System
  • Reconnect the battery.
  • Start the engine and test the AC system for proper cooling.
  • Monitor the pressures with the manifold gauge to ensure they remain within normal limits.