how to reset the oil light on a Volkswagen Golf MK6 (2009-2014)

Volkswagen Golf MK7 (2015-2019)

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

334 words

Problem Statement

Learn how to reset the oil light on your 2009-2014 Volkswagen Golf MK6 after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

Important safety information - read before proceeding

•Ensure the vehicle is stationary and on a level surface before performing the reset.

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Wait for the oil light to flash, indicating that the reset is successful.
6
Turn off the ignition and remove the key.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition without starting the engine.
3
Press the accelerator pedal fully three times within 10 seconds.
4
Turn the ignition to the 'On' position (do not start the engine).
5
Wait for the oil light to flash, indicating that the reset is successful.
6
Turn off the ignition and remove the key.

Solution

1. Preparation

Gather necessary tools:
- Vehicle owner’s manual (for reference)
- OBD-II scanner (optional for checking other codes)

2. Reset Oil Light

Key Positioning: Insert the vehicle key into the ignition.
Pedal Input: Press the accelerator pedal fully three times within 10 seconds.
Ignition Activation: Turn the ignition to the "On" position without starting the engine.
Confirmation: Observe the oil light; it should flash and then turn off.
Final Steps: Turn off the ignition and remove the key.