FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the windshield wipers not working on my Volkswagen Golf MK7 (2015-2019) - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7 (2015-2019)/how to fix the windshield wipers not working on my Volkswagen Golf MK7 (2015-2019)

how to fix the windshield wipers not working on my Volkswagen Golf MK7 (2015-2019)

Volkswagen Golf MK7 (2015-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
575 words

Problem Statement

Learn how to diagnose and fix windshield wipers not working on Volkswagen Golf MK7 (2015-2019). Step-by-step guide with tools and tips.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to prevent short circuits.
  • •Allow the engine to cool before working on any components near the engine bay.

Symptoms

  • •Windshield wipers do not operate at all
  • •Wipers stuck in one position
  • •Wipers operate intermittently
  • •No sound from wiper motor when activated
  • •Washer fluid does not spray when wipers are activated
  • •Wiper control stalk feels loose or unresponsive

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdriver set
  • •Torque wrench

Parts Required

  • •Wiper fuse (if blown)
  • •Wiper motor (if faulty)
  • •Wiper switch (if defective)
  • •Wiper linkage (if damaged)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Park the vehicle on a level surface, turn off the ignition, and disconnect the battery.

Tools Required:

  • OBD-II scanner (if needed for troubleshooting)
  • Multimeter
  • Socket set
  • Screwdriver set
  • Torque wrench
2. Check and Replace the Wiper Fuse
  • Locate the fuse box; refer to the owner's manual for the exact location.
  • Remove the fuse related to the windshield wipers using fuse pullers.
  • Inspect for a blown fuse and replace it with one of the same amperage, if necessary.
3. Inspect and Repair the Wiper Motor Connector
  • Locate the wiper motor, typically situated under the hood near the base of the windshield.
  • Disconnect the wiper motor connector by pressing the tab and pulling it off.
  • Inspect for corrosion or damage. Clean the contacts with electrical cleaner if corroded.
  • Reconnect the connector securely.
4. Test and Replace the Wiper Switch
  • Remove the steering column cover using a screwdriver.
  • Disconnect the wiper switch connector.
  • Use a multimeter to check for continuity across the switch terminals while activating the wiper stalk.
  • If the switch is faulty, replace it with a new one.
5. Examine the Wiper Linkage
  • Remove the wiper arms by loosening the securing nuts with a socket.
  • Disconnect the wiper linkage from the wiper motor.
  • Inspect the linkage for any wear or breakage. Replace if damaged.
6. Install and Test
  • Reassemble the wiper linkage and wiper arms securely.
  • Reconnect the battery.
  • Test the wipers on all settings to confirm functionality.