how to fix the windshield wipers not working in Volkswagen Golf MK7 (2015-2019)

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

527 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix windshield wipers not working on Volkswagen Golf MK7 (2015-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the vehicle to cool down before accessing components under the hood.

Symptoms

•Windshield wipers do not activate when the switch is turned on
•Wiper motor makes no sound or movement
•Wipers operate intermittently or only on certain speeds
•Dashboard warning lights may illuminate (if applicable)
•Washer fluid does not spray when activated

Diagnostic Steps

1
Check the fuse for the wiper motor in the fuse box and replace if blown.
2
Inspect the wiper switch for proper operation using a multimeter.
3
Test the wiper motor by applying direct power from the battery.
4
Examine the wiring harness and connectors for damage or loose connections.
5
Check the windshield wiper linkage for any disconnections or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Torx screwdriver
•Multimeter
•Jumper wires
•Puller tool for wiper arms
•Socket set

Parts Required

•Wiper motor (if faulty)
•Wiper switch (if faulty)
•Wiper linkage (if damaged)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the fuse for the wiper motor in the fuse box and replace if blown.
2
Inspect the wiper switch for proper operation using a multimeter.
3
Test the wiper motor by applying direct power from the battery.
4
Examine the wiring harness and connectors for damage or loose connections.
5
Check the windshield wiper linkage for any disconnections or damage.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Disconnect the negative battery terminal to prevent electrical shock.

2. Check and Replace the Fuse

Locate the fuse box, typically found near the driver’s side dashboard.
Remove the cover and identify the wiper fuse based on the diagram.
Use a fuse puller or pliers to extract the fuse. Inspect it; if the metal filament is broken, replace it with a fuse of the same amperage.

3. Inspect and Replace the Wiper Switch

Remove the steering column cover using a Torx screwdriver.
Disconnect the wiper switch connector.
Use a multimeter to test the switch for continuity when actuated.
If faulty, replace the switch by installing a new one and reconnecting the harness.

4. Test and Replace the Wiper Motor

Locate the wiper motor, typically under the windshield cowling.
Disconnect the motor's electrical connector.
Use jumper wires to connect the motor directly to the battery to test for functionality.
If it does not operate, remove the motor by unscrewing the mounting bolts, then replace with a new wiper motor.

5. Inspect the Wiper Linkage

Remove the wiper arms by using a puller tool if necessary.
Check the linkage for any disconnections or wear.
If damaged, replace the linkage assembly and reinstall the wiper arms.