FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the power window not working in my Volkswagen Golf MK6 (2009-2014)? - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7 (2015-2019)/how to fix the power window not working in my Volkswagen Golf MK6 (2009-2014)?

how to fix the power window not working in my Volkswagen Golf MK6 (2009-2014)?

Volkswagen Golf MK7 (2015-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
548 words

Problem Statement

Learn how to diagnose and fix power window issues in Volkswagen Golf MK6 (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to prevent shocks or shorts.

Symptoms

  • •Power window switch does not respond
  • •Window is stuck in the closed or open position
  • •Clicking sound from the door when the switch is activated
  • •Other windows working normally
  • •Check window lock feature; windows do not respond

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Fuse puller

Parts Required

  • •Power window switch (if faulty)
  • •Power window motor (if faulty)
  • •Replacement fuse (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: OBD-II scanner, multimeter, socket set, flathead screwdriver, Phillips screwdriver.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
2. Inspect and Replace Fuse
  • Locate the fuse box: Typically found under the dashboard on the driver’s side or in the engine compartment.
  • Remove the fuse: Identify the power window fuse using the diagram on the fuse box cover. Use a fuse puller or pliers.
  • Inspect the fuse: If the metal strip inside is broken, replace it with a new fuse of the same amperage.
3. Test and Replace the Window Switch
  • Remove the door panel: Use a flathead screwdriver to pry off the door handle cover, then remove screws holding the panel in place. Gently pull the panel away from the door.
  • Disconnect the switch connector: Carefully unplug the power window switch from its harness.
  • Test the switch: Use a multimeter to check for continuity when the switch is pressed. If faulty, replace the switch by installing a new one and reconnecting it.
4. Inspect and Replace the Window Motor
  • Access the window motor: With the door panel removed, locate the motor assembly.
  • Disconnect the motor: Unplug the motor connector.
  • Test the motor: Apply direct battery voltage to the motor terminals. If it does not operate, replace the motor.
  • Install the new motor: Secure it back in place and reconnect the electrical connector.
5. Reassemble the Door Panel
  • Reattach the door panel: Align the panel correctly and press it into place, ensuring all clips are engaged.
  • Replace screws and covers: Reinstall any screws and the door handle cover.