how to fix power windows not working in Volkswagen Golf MK6 (2009-2014)

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

559 words

Problem Statement

Learn how to diagnose and fix power windows not working in Volkswagen Golf MK6 (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery to prevent electrical shock and short circuits.

Symptoms

•No response when pressing the window switch
•Windows stuck in the closed or open position
•Clicking sound from the door when switch is activated
•Driver's window switch operates other windows but not the driver's window
•Window lock switch not responding

Diagnostic Steps

1
Check the fuses related to the power windows using the fuse box diagram.
2
Inspect the window switches for any visible damage or debris.
3
Test the power window motor by applying direct power to it.
4
Examine the wiring harness and connectors for any signs of wear or disconnection.
5
Use a multimeter to check for voltage at the window switch when activated.
6
Verify that the window regulator is functioning mechanically without obstruction.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Screwdriver set
•Socket set
•Multimeter
•Wire connectors
•Electrical tape

Parts Required

•Power window switch (if faulty)
•Window motor (if faulty)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the fuses related to the power windows using the fuse box diagram.
2
Inspect the window switches for any visible damage or debris.
3
Test the power window motor by applying direct power to it.
4
Examine the wiring harness and connectors for any signs of wear or disconnection.
5
Use a multimeter to check for voltage at the window switch when activated.
6
Verify that the window regulator is functioning mechanically without obstruction.

Solution

1. Preparation

Gather tools and parts. Ensure the vehicle is parked safely and the ignition is turned off.
Tools Required: Screwdriver set, socket set, multimeter, wire connectors, electrical tape.
Parts Required: Power window switch (if faulty), window motor (if faulty), fuses (if blown).
Safety Warnings: Disconnect the battery to prevent electrical shock and short circuits.

2. Check and Replace Fuses

Locate the fuse box (usually under the dashboard or in the engine compartment).
Remove the fuse for the power windows using the fuse puller.
Inspect the fuse for continuity. If blown, replace it with an identical fuse (check the amperage).
Reconnect the battery and test the window switches.

3. Inspect and Replace Window Switch

Remove the door panel using a screwdriver to access the window switch.
Disconnect the switch connector and use a multimeter to check for continuity.
If the switch is faulty, replace it with a new one.
Reassemble the door panel and test the window operation.

4. Test and Replace Power Window Motor

If the switch is functional, test the power window motor by applying 12V directly from a battery.
If the motor does not operate, it may be faulty and needs replacement.
Remove the door panel again, disconnect the motor, and replace it with a new unit.
Secure all connections and reassemble the door panel.

5. Check Wiring and Ground Connections

Inspect the wiring harness for any damage or disconnection, especially at the door hinge.
Repair any damaged wires or connections using electrical tape or wire connectors.
Ensure the ground connection for the power window circuit is secure and free of corrosion.