FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my Volkswagen Golf MK6 (2009-2014) parking brake light staying on - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7 (2015-2019)/how to fix my Volkswagen Golf MK6 (2009-2014) parking brake light staying on

how to fix my Volkswagen Golf MK6 (2009-2014) parking brake light staying on

Volkswagen Golf MK7 (2015-2019)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
511 words

Problem Statement

Learn how to diagnose and fix the parking brake light staying on in Volkswagen Golf MK6 (2009-2014). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Ensure the vehicle is securely supported before crawling underneath.

Symptoms

  • •Parking brake light illuminated on the dashboard
  • •Brake warning light may also be on
  • •Possible difficulty in shifting gears
  • •No mechanical resistance when pulling the parking brake lever
  • •Unusual noises from the rear brakes when released

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdrivers
  • •Brake fluid (DOT 4)

Parts Required

  • •Brake light switch (if replacement is necessary)
  • •Brake fluid (if topping up)

Additional Information

Affected Component
Brakes
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a flat surface and secure it with wheel chocks.
  • Disconnect the negative terminal of the battery for safety.
2. Inspect and Adjust the Parking Brake Lever
  • Sub-steps:
    1. Remove any covers around the parking brake lever.
    2. Ensure that the lever fully returns to its resting position when released.
    3. If necessary, adjust the tension of the parking brake cable by locating the adjustment nut under the vehicle or at the lever.
3. Check the Brake Fluid Level
  • Sub-steps:
    1. Open the hood and locate the master cylinder reservoir.
    2. Check the brake fluid level; if it is low, top it up with the appropriate type of brake fluid (usually DOT 4).
    3. Inspect for any leaks in the brake lines or connections.
4. Test and Replace the Brake Light Switch
  • Sub-steps:
    1. Locate the brake light switch on the parking brake lever.
    2. Use a multimeter to test the switch for continuity when the lever is in the released position.
    3. If the switch is faulty, disconnect it and replace it with a new one, ensuring proper alignment for activation.
5. Reassemble and Reconnect Battery
  • Sub-steps:
    1. Reattach any covers removed during the inspection.
    2. Reconnect the negative terminal of the battery.
    3. Double-check all connections and ensure everything is secure.