how do I fix the wipers not working on my Volkswagen Golf MK6 (2009-2014)?

Volkswagen Golf MK7 (2015-2019)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

458 words

Problem Statement

Learn how to diagnose and fix windshield wipers not working on Volkswagen Golf MK6 (2009-2014). Step-by-step guide with tools and parts required.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.

Symptoms

•Windshield wipers do not operate at all
•Wiper motor makes no sound when activated
•Wipers remain stuck in the 'off' position
•Check engine light may be illuminated (if related to electrical issues)
•Washer fluid does not spray when activated

Diagnostic Steps

1
Inspect the wiper switch for any visible damage or wear.
2
Check the fuse for the windshield wipers in the fuse box and replace if blown.
3
Test the wiper motor by applying direct power using a multimeter.
4
Inspect the wiring and connections for corrosion or loose connections.
5
Verify the operation of the wiper relay by swapping with a similar relay in the fuse box.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Screwdriver set
•Multimeter
•Pliers
•Socket set

Parts Required

•Wiper motor (if replacement is necessary)
•Wiper fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wiper switch for any visible damage or wear.
2
Check the fuse for the windshield wipers in the fuse box and replace if blown.
3
Test the wiper motor by applying direct power using a multimeter.
4
Inspect the wiring and connections for corrosion or loose connections.
5
Verify the operation of the wiper relay by swapping with a similar relay in the fuse box.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the negative battery terminal to ensure safety during the repair.

Tools Required:

Screwdriver set
Multimeter
Pliers
Socket set

2. Replace Wiper Fuse

Locate the fuse box, typically found under the dashboard or in the engine compartment.
Identify the wiper fuse using the diagram on the fuse box cover.
Remove the fuse using pliers and inspect it for continuity.
If blown, replace it with a fuse of the same amperage.

3. Test and Replace Wiper Motor (if needed)

Remove the wiper arms: Use a flat screwdriver to lift the plastic cover, then unscrew the nut holding the arm and pull it off.
Remove the wiper motor: Unscrew the bolts securing the motor to the mounting bracket.
Disconnect the electrical connector from the motor.
Test the motor by connecting it directly to the battery; if it does not operate, replace the motor.

Parts Required:

Wiper motor (if replacement is necessary)
Wiper fuse (if blown)

4. Reassemble and Test

Reinstall the wiper motor by reversing the removal steps.
Reattach wiper arms and secure them properly.
Reconnect the negative battery terminal.
Test the wipers and washer fluid to ensure functionality.