why does my Volkswagen Golf Eighth Generation (2020-present) door ajar light stay on?

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

489 words

Problem Statement

Learn how to diagnose and fix the door ajar light issue in Volkswagen Golf Eighth Generation (2020-present). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems to avoid shorts or shocks.

Symptoms

•Door ajar warning light stays illuminated on the dashboard
•Possible chime or alert sound when the ignition is on
•Difficulty locking the vehicle remotely
•Inconsistent interior light operation (lights may stay on)
•Reduced battery life due to lights remaining on

Diagnostic Steps

1
Inspect all doors to ensure they are fully closed and latched properly.
2
Check the door switch for each door, ensuring they are functioning correctly.
3
Use an OBD-II scanner to check for any fault codes related to the door or body control module.
4
Visually inspect wiring and connectors associated with the door switches for damage or corrosion.
5
Test the door switch circuit for proper voltage and continuity using a multimeter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers

Parts Required

•Door switch (if faulty)
•Electrical connectors (if wiring is damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect all doors to ensure they are fully closed and latched properly.
2
Check the door switch for each door, ensuring they are functioning correctly.
3
Use an OBD-II scanner to check for any fault codes related to the door or body control module.
4
Visually inspect wiring and connectors associated with the door switches for damage or corrosion.
5
Test the door switch circuit for proper voltage and continuity using a multimeter.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and turn off the ignition.
Disconnect the vehicle battery to prevent electrical shorts.

2. Inspect Door Switches

Tools Required: Multimeter, socket set
Remove the door panel of the affected door(s) by unscrewing and unclipping it carefully.
Locate the door switch, which is typically mounted on the door latch mechanism.
Disconnect the switch connector and inspect for damage or corrosion.
Use a multimeter to test the switch for continuity when pressed and released. Replace if faulty.

3. Repair or Replace Wiring

If wiring is damaged, carefully remove the insulation and splice in new wire using solder or appropriate connectors.
Ensure connections are secure and insulated with heat shrink tubing or electrical tape.

4. Reassemble Components

Reconnect all switches and wiring.
Reinstall the door panel, ensuring all clips and screws are secured.
Reconnect the vehicle battery.

5. Final Check

Test each door by opening and closing them while observing the dashboard light for proper function.