FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Volkswagen Golf Seventh Generation (2013-2020) check engine light keeps coming on, what to do? - Volkswagen Golf
Home/Cars/Volkswagen/Golf/Eighth Generation (2020-present)/Volkswagen Golf Seventh Generation (2013-2020) check engine light keeps coming on, what to do?

Volkswagen Golf Seventh Generation (2013-2020) check engine light keeps coming on, what to do?

Volkswagen Golf Eighth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
551 words

Problem Statement

Learn how to diagnose and fix the check engine light issue in Volkswagen Golf (2013-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Engine running rough or misfiring
  • •Decreased fuel economy
  • •Increased exhaust emissions
  • •Unusual engine noises (tapping or knocking)
  • •Loss of power during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Screwdrivers

Parts Required

  • •Gas cap (if defective)
  • •Spark plugs (if worn)
  • •Ignition coils (if defective)
  • •Air filter (if dirty)
  • •Fuel filter (if clogged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative terminal of the battery to ensure safety.
  • Allow the engine to cool before starting work.
2. Address Error Codes
  • Use the OBD-II scanner to read and record the error codes.
  • Research the codes to determine possible causes and repairs needed.
3. Repair or Replace Components

A. Gas Cap

  • Inspect: Check the gas cap for cracks or damaged seals.
  • Replace: If damaged, install a new gas cap, ensuring it clicks securely.

B. Spark Plugs and Ignition Coils

  • Remove: Use a socket set to remove the ignition coils.
  • Inspect: Check spark plugs for wear; replace if necessary.
    • Torque new spark plugs to manufacturer's specifications (usually around 15 lb-ft).
  • Reinstall: Reinstall ignition coils, ensuring they are seated properly.

C. Air Filter

  • Remove: Open the air filter housing and take out the old air filter.
  • Install: Place a new air filter in the housing, ensuring a tight seal.

D. Fuel Pressure

  • Connect: Attach the fuel pressure gauge to the fuel rail.
  • Test: Turn the ignition to the ON position without starting the engine and check the gauge reading for proper fuel pressure.
  • Repair: If pressure is low, inspect the fuel pump and fuel filter for issues and replace as necessary.
4. Clear Error Codes
  • Use the OBD-II scanner to clear error codes after repairs.
  • Reconnect the battery terminal.