Volkswagen Golf Eighth Generation (2020-present) remote start not working what could be wrong

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

587 words

Problem Statement

Learn how to diagnose and fix remote start issues in Volkswagen Golf (2020-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the vehicle's battery before working on electrical systems if necessary

Symptoms

•Remote start feature does not activate when button is pressed
•Vehicle does not respond with lights or horn confirmation
•Key fob battery may be low or dead
•Check engine light illuminated or other warning lights on the dashboard
•Inability to lock or unlock doors remotely
•Remote start function works intermittently

Diagnostic Steps

1
Check key fob battery; replace if necessary
2
Scan for error codes using OBD-II scanner
3
Inspect remote start system for proper connection and power
4
Access vehicle’s infotainment system to ensure remote start is enabled
5
Use a multimeter to measure key fob signal output
6
Visually inspect wiring and connectors related to the remote start system

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Flathead screwdriver
•Phillips screwdriver
•Replacement key fob battery

Parts Required

•Replacement key fob battery (CR2032)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Remote start feature does not activate when button is pressed

•Vehicle does not respond with lights or horn confirmation

•Key fob battery may be low or dead

•Check engine light illuminated or other warning lights on the dashboard

•Inability to lock or unlock doors remotely

•Remote start function works intermittently

Diagnostic Steps

1
Check key fob battery; replace if necessary
2
Scan for error codes using OBD-II scanner
3
Inspect remote start system for proper connection and power
4
Access vehicle’s infotainment system to ensure remote start is enabled
5
Use a multimeter to measure key fob signal output
6
Visually inspect wiring and connectors related to the remote start system

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, flathead screwdriver, Phillips screwdriver, replacement key fob battery (if needed).
Ensure the vehicle is parked in a safe, well-ventilated area and the engine is turned off.

2. Replace Key Fob Battery

Sub-steps:
1. Use a flathead screwdriver to gently pry open the key fob casing.
2. Remove the old battery and take note of the battery type (usually CR2032).
3. Insert the new battery ensuring the positive (+) side is facing up.
4. Snap the key fob casing back together securely.

3. Clear Error Codes

Sub-steps:
1. Connect the OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition to the "ON" position without starting the engine.
3. Follow the scanner prompts to read and clear any error codes.
4. Disconnect the scanner after clearing codes.

4. Inspect Remote Start Module

Sub-steps:
1. Locate the remote start module (typically found under the dashboard or near the fuse box).
2. Ensure all connectors are secure and free of corrosion.
3. Check for any blown fuses related to the remote start system in the fuse box.

5. Check Vehicle Settings

Sub-steps:
1. Start the vehicle and navigate to the infotainment system.
2. Access the settings menu and select "Vehicle".
3. Look for the “Remote Start” option and ensure it is enabled.
4. Save any changes made.