FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volkswagen Golf's wipers won't turn off how can I fix this - Volkswagen Golf
Home/Cars/Volkswagen/Golf/Eighth Generation (2020-present)/my Volkswagen Golf's wipers won't turn off how can I fix this

my Volkswagen Golf's wipers won't turn off how can I fix this

Volkswagen Golf Eighth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
509 words

Problem Statement

Learn how to diagnose and fix windshield wipers that won't turn off in Volkswagen Golf. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

  • •Wipers remain in operation even after the switch is turned off
  • •Intermittent wiper function may not respond correctly
  • •Wiper speed settings may not change the wiper operation
  • •Wiper motor may make noise even when not in use
  • •Dashboard warning lights may illuminate (if applicable)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Wrench set
  • •Flathead screwdriver
  • •Multimeter
  • •OBD-II scanner

Parts Required

  • •Wiper switch (if faulty)
  • •Wiper relay (if faulty)
  • •Wiper motor (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Wrench set, flathead screwdriver, multimeter, OBD-II scanner.
  • Disconnect the vehicle's battery to ensure safety during repairs.
2. Inspect and Replace Wiper Switch
  • Remove the steering column cover using a flathead screwdriver.
  • Disconnect the wiring harness from the wiper switch.
  • Test the wiper switch with a multimeter to ensure it operates correctly; if faulty, replace it.
  • Reconnect the new or verified wiper switch and reassemble the steering column cover.
3. Check and Replace Wiper Relay
  • Locate the wiper relay in the fuse box; refer to the owner's manual for exact location.
  • Remove the relay and test it by swapping with another relay of the same type.
  • If the wipers operate correctly with the swapped relay, replace the faulty relay.
4. Inspect and Replace the Wiper Motor
  • Remove the wiper arms by loosening the retaining nuts using a wrench.
  • Disconnect the wiper motor wiring harness.
  • Remove the mounting bolts for the wiper motor and take it out.
  • Test the motor with a multimeter; if it does not function correctly, replace it.
  • Install the new motor, reconnect the wiring harness, and reattach the wiper arms.
5. Reconnect Battery and Test
  • Reconnect the vehicle's battery.
  • Test the wipers to ensure they operate normally across all settings.