my Volkswagen Golf Eighth Generation (2020-present) wipers stopped working suddenly

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

467 words

Problem Statement

Learn how to diagnose and fix windshield wipers not working on Volkswagen Golf (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

•Wipers do not operate at all
•Wiper motor does not make any sound when activated
•No movement of wiper blades
•Windshield washer fluid does not spray
•Warning lights related to wiper system may illuminate on the dashboard

Diagnostic Steps

1
Check the wiper switch on the steering column for functionality.
2
Inspect the fuse related to the wiper system in the fuse box.
3
Use a multimeter to test for power at the wiper motor connector.
4
Verify the condition of the wiper motor by checking for any physical damage or corrosion.
5
Inspect the wiring harness for any visible breaks or loose connections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Socket set
•Fuse puller or pliers
•Screwdriver set

Parts Required

•Wiper motor (if faulty)
•Replacement fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the wiper switch on the steering column for functionality.
2
Inspect the fuse related to the wiper system in the fuse box.
3
Use a multimeter to test for power at the wiper motor connector.
4
Verify the condition of the wiper motor by checking for any physical damage or corrosion.
5
Inspect the wiring harness for any visible breaks or loose connections.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the vehicle's battery to ensure safety while working on electrical components.

2. Check and Replace the Fuse

Locate the fuse box in the driver's side footwell or under the dashboard.
Remove the fuse for the windshield wipers using a fuse puller or pliers.
Inspect the fuse for continuity; replace if blown with a new fuse of the same rating (typically 20A).
Reinstall the fuse and reconnect the battery.

3. Inspect and Replace the Wiper Motor

If the fuse is intact, access the wiper motor, typically located under the cowl at the base of the windshield.
Remove any trim or covers to expose the wiper motor.
Disconnect the electrical connector from the wiper motor.
Use a socket set to unbolt and remove the wiper motor from its mounting location.
Install the new wiper motor by reversing the removal steps, ensuring proper alignment and securing the bolts to the manufacturer’s torque specifications (consult service manual for exact torque values).

4. Reconnect Components

Reconnect the electrical connector to the new wiper motor.
Reinstall any covers or trim pieces that were removed.
Reconnect the vehicle's battery.