my Volkswagen Golf Eighth Generation (2020-present) has a clicking noise in the steering column what...

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

475 words

Problem Statement

Learn how to diagnose and fix clicking noise in the steering of your Volkswagen Golf Eighth Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool down before performing any inspections or repairs.

Symptoms

•Clicking noise when turning the steering wheel
•Difficulty in steering or feeling of resistance
•Loose or wobbly steering wheel
•No warning lights illuminated on the dashboard
•Potentially increased play in the steering

Diagnostic Steps

1
Inspect the steering column and surrounding area for loose components or debris.
2
Check for proper tightness of the steering wheel mounting nut.
3
Use an OBD-II scanner to check for any related error codes.
4
Examine the intermediate steering shaft for wear or damage.
5
Inspect the steering rack and associated linkage for any signs of wear or damage.
6
Test the vehicle's alignment to rule out steering issues related to suspension components.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Torque wrench
•Trim removal tool
•Socket set

Parts Required

•Intermediate steering shaft (if needed)
•Any worn or damaged steering rack components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the steering column and surrounding area for loose components or debris.
2
Check for proper tightness of the steering wheel mounting nut.
3
Use an OBD-II scanner to check for any related error codes.
4
Examine the intermediate steering shaft for wear or damage.
5
Inspect the steering rack and associated linkage for any signs of wear or damage.
6
Test the vehicle's alignment to rule out steering issues related to suspension components.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to prevent electrical issues.

2. Inspect Steering Column

Remove the steering wheel cover using a trim removal tool.
Check for any visible damage to the steering column or associated wiring.
Ensure all screws and bolts are tightened according to manufacturer specifications.

3. Check Steering Wheel Nut

Use a torque wrench to check the tightness of the steering wheel nut.
- Torque specification: 35 Nm (25 ft-lbs).
If loose, tighten to the specified torque and recheck for clicking noise.

4. Examine Intermediate Steering Shaft

Remove necessary panels to access the intermediate steering shaft.
Inspect for any worn or damaged U-joints or couplings.
If damaged, replace the intermediate steering shaft with a new OEM part.

5. Inspect Steering Rack and Linkage

Visually inspect the steering rack and linkage for any signs of wear, leaks, or damage.
If any components are worn, replace them with new OEM parts.
Lubricate any pivot points if applicable.