how to reset tire pressure light on Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

Learn how to reset the tire pressure light on Volkswagen Golf (2013-2020). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is turned off when adjusting tire pressures to avoid accidental engagement.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible fluctuation in tire pressure readings
•Change in vehicle handling or ride comfort
•Warning message displayed on the infotainment system

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge.
2
Inspect all tires for visible damage or leaks.
3
Verify that the spare tire, if equipped, is also properly inflated.
4
Examine the tire pressure monitoring system (TPMS) sensor status using an OBD-II scanner if necessary.
5
Ensure that the vehicle's battery is not low, as this can affect TPMS functionality.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor
•OBD-II scanner

Parts Required

•None required for reset; however, consider replacing TPMS sensors if faulty.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the current tire pressures using a tire pressure gauge.
2
Inspect all tires for visible damage or leaks.
3
Verify that the spare tire, if equipped, is also properly inflated.
4
Examine the tire pressure monitoring system (TPMS) sensor status using an OBD-II scanner if necessary.
5
Ensure that the vehicle's battery is not low, as this can affect TPMS functionality.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, air compressor, and OBD-II scanner (if needed).
Ensure the vehicle is parked on a level surface and the engine is off.

2. Check and Adjust Tire Pressure

Sub-step 1: Using the tire pressure gauge, check the pressure of each tire, including the spare if applicable.
Sub-step 2: Inflate any tires that are below the recommended pressure, which can typically be found on the driver’s door jamb.
Sub-step 3: After inflating, check the pressure again to ensure it meets the recommended specifications.

3. Reset the TPMS Light

Sub-step 1: Turn the ignition to the "ON" position without starting the engine.
Sub-step 2: Locate the TPMS reset button, usually found under the steering wheel or in the glove box.
Sub-step 3: Press and hold the TPMS reset button until the tire pressure light blinks three times, indicating the system is resetting.
Sub-step 4: Release the reset button and turn the ignition off.
Sub-step 5: Start the vehicle. The tire pressure light should remain off if the system has reset successfully.