how to reset the oil change light on Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

370 words

Problem Statement

Learn how to reset the oil change light on your 2013-2020 Volkswagen Golf. Step-by-step guide to ensure your maintenance reminder is cleared.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and the parking brake is engaged before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder notification displayed
•Engine oil change has been performed but indicator remains active

Diagnostic Steps

1
Ensure the vehicle is in a parked position and the ignition is turned off.
2
Turn the ignition to the ON position without starting the engine.
3
Locate the trip reset button on the dashboard.
4
Press and hold the trip reset button until the service indicator starts flashing.
5
Release the trip reset button and then press it again until the oil change light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a parked position and the ignition is turned off.
2
Turn the ignition to the ON position without starting the engine.
3
Locate the trip reset button on the dashboard.
4
Press and hold the trip reset button until the service indicator starts flashing.
5
Release the trip reset button and then press it again until the oil change light resets.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Gather necessary tools: none required for this procedure.

2. Turn On Ignition

Insert the key into the ignition or press the start button.
Turn the ignition to the ON position without starting the engine.

3. Reset the Oil Change Light

Locate the trip reset button on the instrument cluster.
Press and hold the trip reset button until the service light begins to flash.
Release the button.
Quickly press the trip reset button again to confirm the reset. The oil change light should turn off.

4. Verify Reset

Turn off the ignition and then start the engine.
Check to ensure the oil change light is no longer illuminated.