how to reset the oil change light in Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

386 words

Problem Statement

Learn how to reset the oil change light in your Volkswagen Golf (2013-2020) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the parking brake is engaged before performing the reset.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance reminder message appears on the display
•Vehicle may not allow resetting of the light through standard methods

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position but the engine is off.
2
Check the odometer reading to confirm the current mileage.
3
Verify that the oil change has been completed and correct oil level is present.
4
Confirm that the vehicle’s battery is not disconnected, which could affect the system.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools, such as the vehicle's key fob.

2. Access the Oil Change Light Reset Function

Insert the key fob into the ignition and turn to the "On" position (do not start the engine).
If equipped, press the "OK" button on the steering wheel controls or use the touchscreen display.

3. Navigate to the Vehicle Settings

Use the steering wheel buttons to scroll through the menu on the instrument cluster.
Select "Settings" or "Vehicle" using the "OK" button.
Look for "Service Interval" or "Oil Change."

4. Reset the Oil Change Light

Once in the "Service Interval" menu, select "Reset."
Confirm the reset action when prompted by selecting "Yes."
Wait for the confirmation message that indicates the reset was successful.

5. Final Check

Turn off the ignition and then start the engine.
Verify that the oil change light is no longer illuminated.