how to reset the oil change light in Volkswagen Golf Seventh Generation (2013-2020)?

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

385 words

Problem Statement

Learn how to reset the oil change light in Volkswagen Golf (2013-2020) with this step-by-step guide. Quick and easy instructions for maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmission) before performing any actions.

Symptoms

•Oil change light remains illuminated on the dashboard
•Service reminder message appears on the display
•Engine oil maintenance interval warning is displayed

Diagnostic Steps

1
Ensure the vehicle is turned off and the ignition key is removed.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Locate the trip reset button on the dashboard, usually found on the instrument cluster.
4
Press and hold the trip reset button until the mileage display resets to zero.
5
Release the trip reset button and turn the ignition off.
6
Start the vehicle to confirm that the oil change light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and the ignition key is removed.
2
Insert the key into the ignition and turn it to the 'On' position without starting the engine.
3
Locate the trip reset button on the dashboard, usually found on the instrument cluster.
4
Press and hold the trip reset button until the mileage display resets to zero.
5
Release the trip reset button and turn the ignition off.
6
Start the vehicle to confirm that the oil change light has been reset.

Solution

1. Preparation

Gather necessary tools and ensure you have the vehicle's key.
Ensure the vehicle is parked on a level surface and the engine is off.

2. Turn on Ignition

Insert the key into the ignition.
Turn the key to the "On" position (do not start the engine).

3. Reset Oil Change Light

Press and hold the trip reset button (located on the dashboard).
While holding the button, turn the ignition off and then back to the "On" position without starting the engine.
Continue holding the trip reset button until the oil change light resets (this may take about 10 seconds).

4. Confirm Reset

Release the trip reset button.
Turn off the ignition and then start the engine to confirm that the oil change light has been successfully reset.