FAULTBASE
NEWSASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Toyota/Tacoma/N300 (2016-Present)/why does my Toyota Tacoma N300 (2016-Present) check engine light keep coming on

why does my Toyota Tacoma N300 (2016-Present) check engine light keep coming on

Toyota Tacoma N300 (2016-Present)

Severity: mediumDifficulty: mediumError Code: P04202-4 hours
3 min read
461 words

Problem Statement

Learn how to diagnose and fix P0420 catalytic converter efficiency issues in Toyota Tacoma N300. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0420
Component
Engine
Repair Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before removing components.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine stalling
  • •Poor fuel economy
  • •Increased emissions
  • •Unusual noises from the engine
  • •Difficulty starting the vehicle

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to identify specific trouble codes.
  2. 2Inspect the gas cap for proper sealing; a loose or damaged cap can trigger the check engine light.
  3. 3Check engine oil and coolant levels to rule out low fluid issues.
  4. 4Examine the air intake system for any leaks or obstructions.
  5. 5Test the battery and charging system voltage to ensure adequate power supply.
  6. 6Inspect ignition components such as spark plugs and coils for wear or damage.

Solution

Solution

1. Preparation

  • Gather tools and safety equipment.
  • Connect the OBD-II scanner to retrieve and note any trouble codes.
  • Safety Warning: Disconnect the battery before working on electrical systems.

2. Address Fault Codes

  • Based on the retrieved codes, look up specifics to diagnose the related systems.
  • If a P0420 code (Catalytic Converter Efficiency Below Threshold) appears, inspect the catalytic converter and oxygen sensors.

3. Inspect and Replace Components

  • Gas Cap:
    • Remove the gas cap and inspect for cracks or wear; replace if necessary.
  • Spark Plugs and Coils:
    • Remove the engine cover (if applicable) and disconnect ignition coils.
    • Replace spark plugs with OEM specifications; torque to 13 lb-ft.
    • Reinstall ignition coils.

4. Check and Clean Air Intake System

  • Remove the air filter and inspect for dirt; replace if necessary.
  • Clean the throttle body using throttle body cleaner and a soft cloth.

5. Emission System Check

  • Inspect the exhaust system for leaks.
  • If needed, replace any faulty oxygen sensors as per the diagnostic codes.

Verification

After completing the repair, verify that the issue has been resolved:

  • Test the affected component to ensure it functions correctly
  • Check for any error codes or warning lights
  • Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Throttle body cleaner
  • Screwdrivers

Parts Required

  • Spark plugs
  • Ignition coils (if necessary)
  • Air filter
  • Oxygen sensors (if applicable)

Additional Information

Error CodeP0420
Component

Engine

Repair Time

2-4 hours

Difficulty

medium

Severity

medium

Tools

5 items

Parts

4 items

Related Faults

Discover similar issues

  1. how to troubleshoot poor acceleration in my Toyota Tacoma N300 (2016-Present)

    Learn how to troubleshoot poor acceleration in your Toyota Tacoma N300. Step-by-step guide with diagnostic steps and repair instructions.

    Component:Engine
    Symptoms
    • •Check engine light illuminated
    • •Engine hesitates during acceleration
    • +{count} more

  2. how to fix the AC not blowing cold air in my Toyota Tacoma N300 (2016-Present)?

    Learn how to diagnose and fix the AC not blowing cold air in Toyota Tacoma N300. Step-by-step guide with diagnostic steps and repair instructions.

    Component:HVAC
    Symptoms
    • •A/C system blowing warm air
    • •A/C compressor not engaging
    • +{count} more

  3. why does my Toyota Tacoma N300 (2016-Present) have poor throttle response?

    Discover how to diagnose and fix poor throttle response in Toyota Tacoma N300 (2016-Present). Step-by-step guide with diagnostic steps and repair inst...

    Component:Engine
    Symptoms
    • •Delayed acceleration when pressing the gas pedal
    • •Engine stalling or hesitation during acceleration
    • +{count} more

  4. how to fix the engine noise in my Toyota Tacoma N300 (2016-Present) when accelerating?

    Learn how to diagnose and fix engine noise during acceleration in your 2016-Present Toyota Tacoma N300. Step-by-step guide with tools and tips.

    Component:Engine
    Symptoms
    • •Engine noise that increases with acceleration
    • •Ticking or tapping sounds from the engine compartment
    • +{count} more

  5. what could cause my Toyota Tacoma N300 (2016-Present) to stall while driving

    Learn how to diagnose and fix engine stalling issues in Toyota Tacoma N300 (2016-Present). Step-by-step guide with diagnostic procedures and repair in...

    Component:Engine
    Symptoms
    • •Engine stalls unexpectedly during driving
    • •Rough idle before stalling
    • +{count} more

  6. why is my Toyota Tacoma N300 (2016-Present) engine light flashing?

    Learn how to diagnose and fix a flashing engine light on your 2016-Present Toyota Tacoma N300. Step-by-step guide with diagnostic procedures and repai...

    Component:Engine
    Symptoms
    • •Check engine light is flashing
    • •Engine misfiring or rough running
    • +{count} more

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation