FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Tacoma N300 (2016-Present) - Toyota Tacoma
Home/Cars/Toyota/Tacoma/N300 (2016-Present)/how to reset the maintenance light on my Toyota Tacoma N300 (2016-Present)

how to reset the maintenance light on my Toyota Tacoma N300 (2016-Present)

Toyota Tacoma N300 (2016-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
367 words

Problem Statement

Learn how to reset the maintenance light on your 2016-present Toyota Tacoma N300 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Service reminder showing on the display
  • •No other performance issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for the reset process.

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in a safe location with the ignition off.
  • Have the keys ready to perform the reset procedure.
2. Resetting the Maintenance Light

  1. Turn Ignition On

    • Turn the ignition key to the "ON" position (do not start the engine).

  2. Select Trip Meter

    • Press the odometer reset button until the trip meter is displayed (Trip A or Trip B).

  3. Turn Ignition Off

    • Turn the ignition key to the "OFF" position.

  4. Hold Odometer Reset Button

    • While keeping the odometer reset button pressed, turn the ignition key back to the "ON" position.

  5. Wait for the Light to Reset

    • Keep holding the odometer reset button until you see the maintenance light flash and then turn off, indicating the reset is complete.