FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset service light on Toyota Tacoma N300 (2016-Present) - Toyota Tacoma
Home/Cars/Toyota/Tacoma/N300 (2016-Present)/how to reset service light on Toyota Tacoma N300 (2016-Present)

how to reset service light on Toyota Tacoma N300 (2016-Present)

Toyota Tacoma N300 (2016-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
387 words

Problem Statement

Learn how to reset the service light on a 2016-present Toyota Tacoma N300. Step-by-step guide for a quick and easy reset after maintenance.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe and stable position before performing the reset.

Symptoms

  • •Service light illuminated on the dashboard
  • •Maintenance reminder displaying on the multi-information display
  • •Vehicle performance appears normal but maintenance has been performed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this reset procedure.
  • Ensure the vehicle is parked safely with the engine off.
2. Reset the Service Light
  1. Turn Ignition On: Turn the ignition switch to the "ON" position without starting the engine.
  2. Set Odometer: Check that the odometer is displaying the trip meter (Trip A). If not, toggle the display until it is in the correct mode.
  3. Turn Off Ignition: Turn the ignition switch to the "OFF" position.
  4. Hold Trip Meter Button: Press and hold the trip meter reset button located on the instrument panel.
  5. Turn Ignition On Again: While holding the trip meter reset button, turn the ignition switch back to the "ON" position.
  6. Wait for Reset: Keep holding the button until the service light resets (usually takes 10-15 seconds) and the odometer shows zeros.
  7. Release the Button: Once the service light is off, release the trip meter reset button.