how to improve fuel economy in my Toyota Tacoma N300 (2016-Present)?

Solution

1. Preparation

• Gather all tools and parts needed for the maintenance tasks.
• Ensure the vehicle is parked on a level surface and the engine is cool.

2. Tire Maintenance

• Tools Required: Tire pressure gauge, air compressor.
• Check each tire’s pressure using the gauge and inflate to the recommended PSI found on the driver’s side door jamb.
• Inspect tires for uneven wear and replace if necessary.

3. Replace Air Filter

• Tools Required: Screwdriver or socket set (depending on air filter housing).
• Open the air filter housing by removing the screws or clips.
• Take out the old air filter and clean any debris in the housing.
• Install a new, clean air filter, ensuring it fits snugly.

4. Spark Plug Maintenance

• Tools Required: Socket set, torque wrench.
• Remove the ignition coil (if applicable) to access the spark plugs.
• Unscrew the old spark plugs using a socket and replace them with new ones, ensuring they are gapped correctly.
• Tighten the new spark plugs to the manufacturer’s specified torque.

5. Fuel System Inspection

• Tools Required: Fuel pressure gauge, cleaning solution for injectors.
• Inspect fuel lines for leaks; replace any damaged lines.
• Use a fuel injector cleaning solution to clean the injectors, or remove and clean them using an ultrasonic cleaner if necessary.

6. Engine Oil Change

• Tools Required: Oil filter wrench, socket set, oil drain pan.
• Drain the old engine oil and replace it with the manufacturer-recommended oil.
• Replace the oil filter with a new one and ensure it is tightened correctly.