how to reset the service light on my Toyota RAV4 XA50 (2019-2024)

Toyota RAV4 XA50 (2019-2024)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

351 words

Problem Statement

Learn how to reset the service light on your 2019-2024 Toyota RAV4 XA50 with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Always ensure the vehicle is in 'Park' or 'Neutral' before attempting to reset the service light.

1
Ensure the vehicle is parked with the ignition turned off.
2
Insert the key into the ignition or press the start button without pressing the brake pedal.
3
Locate the odometer button on the instrument cluster.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Press and hold the odometer button until the odometer display shows '000000' or the maintenance light turns off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is parked with the ignition turned off.
2
Insert the key into the ignition or press the start button without pressing the brake pedal.
3
Locate the odometer button on the instrument cluster.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Press and hold the odometer button until the odometer display shows '000000' or the maintenance light turns off.

Solution

1. Preparation

2. Resetting the Service Light

Insert the key into the ignition or ensure the push-start system is ready without starting the engine.
Press the odometer button to display the trip meter.
Turn the ignition key to the "ON" position (or press the start button without the brake).
Press and hold the odometer button for about 10 seconds.
Watch for the display to change to “000000” or the maintenance light to turn off.
Release the odometer button and turn off the ignition.