FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota RAV4 XA40 (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on Toyota RAV4 XA40 (2013-2018)

how to reset the maintenance light on Toyota RAV4 XA40 (2013-2018)

Toyota RAV4 XA40 (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
365 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2018 Toyota RAV4 XA40. Step-by-step guide to ensure your maintenance light is off after service.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the ignition is turned off before starting the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notifications for maintenance displayed
  • •Engine oil change completed, but light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: None required for this reset procedure.
  • Ensure the vehicle is parked with the ignition off.
2. Resetting the Maintenance Light

  1. Locate the Odometer Reset Button

    • Identify the odometer reset button on the instrument cluster (usually located near the speedometer).

  2. Turn the Ignition On

    • Turn the ignition key to the "ON" position, but do not start the engine.

  3. Hold the Odometer Reset Button

    • Press and hold the odometer reset button for approximately 5 seconds until the maintenance light starts to blink.

  4. Complete the Reset

    • After the light blinks, it will turn off. Release the odometer reset button.
    • Turn the ignition off to complete the process.

  5. Verify the Reset

    • Turn the ignition back to the "ON" position and check that the maintenance light is no longer illuminated.