FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)? - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)?

how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)?

Toyota RAV4 XA40 (2013-2018)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
281 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 XA40. Follow our step-by-step guide for a quick and easy solution.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset procedure.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other performance issues are present
  • •Maintenance reminder notification appears

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this process.
2. Reset Maintenance Light
  1. Sit in the driver's seat and ensure all doors are closed.
  2. Locate the odometer/trip meter reset button on the instrument panel.
  3. Press and hold the odometer/trip meter reset button.
  4. While holding the button, turn the ignition switch to the "ON" position (do not start the engine).
  5. Keep holding the reset button. After a few seconds, the maintenance light will start to flash.
  6. Release the reset button when the maintenance light turns off completely.
  7. Turn the ignition switch back to the "OFF" position.