FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the maintenance light on my Toyota RAV4 XA40 (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how do I reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

how do I reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

Toyota RAV4 XA40 (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
396 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 XA40 (2013-2018) with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' mode before performing this procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other engine or system warning lights active
  • •Vehicle maintenance service completed (oil change, filter replacement, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • None required for this procedure.
  • Ensure the vehicle is parked on a flat surface and is in "Park" mode.
2. Resetting the Maintenance Light
  1. Turn Ignition to "ON": Turn the ignition key to the "ON" position without starting the engine.
  2. Display Odometer: Make sure the odometer is displayed on the dashboard. If it shows trip mileage or other information, press the trip reset button until the odometer is displayed.
  3. Turn Off Ignition: Turn the ignition switch back to the "OFF" position.
  4. Press and Hold Trip Reset Button: Press and hold the trip reset button on the dashboard.
  5. Ignition to "ON" Again: While holding the button, turn the ignition switch back to the "ON" position.
  6. Watch for Maintenance Light: Hold the trip reset button until the maintenance light blinks and turns off, indicating the reset is successful.