how to reset the maintenance light on my Toyota RAV4 Fifth Generation (2019-present)

Toyota RAV4 Fifth Generation (2019-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

394 words

Problem Statement

Learn how to reset the maintenance light on your 2019-present Toyota RAV4. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is in 'Park' and on a flat surface while performing any resets.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for scheduled service displayed
•No other engine performance issues present

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Press the 'Start' button twice without pressing the brake pedal to enter the accessory mode.
3
Access the vehicle settings through the multi-information display.
4
Navigate to the 'Settings' menu using the steering wheel controls.
5
Select 'Maintenance' or 'Service' from the menu options.
6
Choose the 'Reset' option to clear the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position.
2
Press the 'Start' button twice without pressing the brake pedal to enter the accessory mode.
3
Access the vehicle settings through the multi-information display.
4
Navigate to the 'Settings' menu using the steering wheel controls.
5
Select 'Maintenance' or 'Service' from the menu options.
6
Choose the 'Reset' option to clear the maintenance light.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the engine is off.
Have the vehicle key fob handy for starting the vehicle.

2. Enter Accessory Mode

Press the "Start" button twice without pressing the brake pedal to enter accessory mode.
Wait for the dashboard lights to illuminate.

3. Access Vehicle Settings

Use the steering wheel controls to navigate to the multi-information display.
Press the "Menu" button on the steering wheel.
Scroll to the "Settings" option using the arrow keys.

4. Navigate to Maintenance Reset

Once in the "Settings" menu, find and select "Maintenance" or "Service".
Highlight the "Reset" option.

5. Confirm Reset

Confirm the reset by pressing the "OK" button or equivalent on the steering wheel.
Wait for the maintenance light to turn off.

6. Exit Accessory Mode

Press the "Start" button once to turn off accessory mode.
Start the engine to ensure the maintenance light is reset.