how to reset the tire pressure monitoring system on Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

504 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) on your 2013-2018 Toyota RAV4. Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a stable surface before performing any maintenance.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message indicating low pressure in one or more tires
•Tire pressure light flashes before remaining solid
•No automatic adjustment of tire pressure readings after inflation

Diagnostic Steps

1
Inspect all tires for proper inflation according to the manufacturer's specifications.
2
Check for any visible damage or issues with the tire pressure sensors.
3
Use an OBD-II scanner to verify if there are any error codes related to the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•TPMS reset tool (if available)
•Tire pressure gauge
•OBD-II scanner (if applicable)

Parts Required

•TPMS sensors (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: TPMS reset tool (if available), a tire pressure gauge, and the owner's manual for reference.
Ensure the vehicle is parked on a level surface and the engine is turned off.

2. Check Tire Pressures

Use a tire pressure gauge to measure the pressure in all four tires.
Inflate or deflate the tires as necessary to match the recommended pressure found on the driver's door jamb sticker.

3. Reset the TPMS

Method A: Using the TPMS Reset Button
1. Turn the ignition key to the "ON" position without starting the engine.
2. Locate the TPMS reset button under the steering wheel or on the dashboard (refer to the owner's manual for exact location).
3. Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release it.
4. Start the engine and allow the vehicle to run for about 20 minutes to complete the reset process.
Method B: Using the OBD-II Scanner
1. Connect the OBD-II scanner to the vehicle's OBD-II port (typically located under the dashboard).
2. Follow the prompts on the scanner to access the TPMS system.
3. Select the option to reset the TPMS and follow the on-screen instructions.

4. Final Steps

After resetting, drive the vehicle for a short distance (about 10 minutes) to allow the TPMS to recalibrate.
Check that the TPMS warning light has turned off. If it remains illuminated, recheck tire pressures and repeat the reset procedure.