how to reset the maintenance light on Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

332 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 (2013-2018) with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface and the parking brake is engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for scheduled maintenance displayed on the instrument cluster
•No other performance issues with the vehicle

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition without starting the engine, or press the 'Start' button twice without pressing the brake pedal.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position while still pressing the gas pedal.
5
Release the gas pedal and check if the maintenance light goes off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition without starting the engine, or press the 'Start' button twice without pressing the brake pedal.
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position while still pressing the gas pedal.
5
Release the gas pedal and check if the maintenance light goes off.

Solution

1. Preparation

Ensure you are in a safe location to perform the reset.
Have the vehicle in "Park" with the engine off.

2. Access Ignition

Insert the key into the ignition, or prepare to use the push-button start.
For push-button start, do not press the brake pedal.

3. Reset Maintenance Light

Turn the ignition to the "ON" position (not starting the engine).
Press the gas pedal three times in quick succession within five seconds.
Turn the ignition back to the "OFF" position.

4. Final Check

Turn the ignition back to the "ON" position to verify that the maintenance light is extinguished.