FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on Toyota RAV4 Fourth Generation (2013-2018)

how to reset the maintenance light on Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
365 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Follow our step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a secure position before performing the reset.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •Driver unaware of next maintenance schedule
  • •Potential confusion regarding vehicle maintenance history

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is parked securely with the ignition off.
2. Resetting the Maintenance Light

  1. Press the Trip Meter Reset Button

    • Locate the trip meter reset button on the dashboard, usually near the speedometer.
    • Press and hold the button down.

  2. Turn on the Ignition

    • While holding the reset button, turn the ignition key to the "ON" position (do not start the engine).
    • Ensure all dashboard lights illuminate.

  3. Wait for the Maintenance Light to Blink

    • Keep holding the trip meter reset button until the maintenance light starts to blink.
    • After a few seconds, the maintenance light will turn off.

  4. Release and Turn Off Ignition

    • Release the trip meter reset button.
    • Turn the ignition off completely.

  5. Verify Reset

    • Turn the ignition back to the "ON" position to verify that the maintenance light is no longer illuminated.