how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)?

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 (2013-2018) with this step-by-step guide. Quick and easy process to turn off the warning light.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the parking brake is engaged while performing this reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible reminders for oil change or other maintenance services
•No engine performance issues

Diagnostic Steps

1
Turn the ignition switch to the OFF position.
2
Press and hold the odometer reset button on the dashboard.
3
While holding the odometer reset button, turn the ignition switch to the ON position (do not start the engine).
4
Continue holding the odometer reset button until the maintenance light flashes and then turns off.
5
Release the odometer reset button and turn the ignition switch to OFF again.
6
Turn the ignition back ON to confirm that the maintenance light has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the OFF position.
2
Press and hold the odometer reset button on the dashboard.
3
While holding the odometer reset button, turn the ignition switch to the ON position (do not start the engine).
4
Continue holding the odometer reset button until the maintenance light flashes and then turns off.
5
Release the odometer reset button and turn the ignition switch to OFF again.
6
Turn the ignition back ON to confirm that the maintenance light has been reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: none required for this process.

2. Reset Maintenance Light

Turn Ignition Off: Ensure the ignition switch is in the OFF position.
Press and Hold Odometer Reset Button: Locate the odometer reset button on the instrument panel and press it.
Turn Ignition On: While holding the odometer reset button, turn the ignition switch to the ON position without starting the engine.
Wait for Light to Flash: Keep holding the odometer reset button until the maintenance light on the dashboard flashes and then goes off. This usually takes a few seconds.
Release the Button: Once the light has turned off, release the odometer reset button.
Turn Ignition Off: Switch the ignition back to the OFF position.
Confirm Reset: Turn the ignition back ON and check that the maintenance light is no longer illuminated.