FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)? - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)?

how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)?

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
407 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 with this simple step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure that the vehicle is in 'Park' and the engine is off before beginning the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Vehicle may prompt for scheduled maintenance
  • •No change in vehicle performance or operation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is parked on a level surface with the ignition off.
2. Resetting the Maintenance Light

  1. Access the Instrument Cluster

    • Sit in the driver’s seat and locate the trip meter reset button on the dashboard (typically located on the right side of the instrument cluster).

  2. Press and Hold the Trip Meter Reset Button

    • Press and hold the trip meter reset button.

  3. Turn Ignition to "ON"

    • While holding the trip meter reset button, turn the ignition key to the "ON" position. Do not start the engine.

  4. Watch for the Maintenance Light

    • Keep holding the trip meter reset button. The maintenance light will begin to blink and then turn off. This indicates that the reset was successful.

  5. Release the Button and Turn Off Ignition

    • Release the trip meter reset button and turn the ignition switch back to the "OFF" position.