FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)? - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)?

how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)?

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
338 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Follow our step-by-step guide for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and on a stable surface before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •No impact on vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this reset.
  • Ensure the vehicle is parked on a level surface and the engine is off.
2. Reset the Maintenance Light
  1. Turn Off the Ignition: Ensure the vehicle is completely off.
  2. Press and Hold the Odometer Trip Reset Button:
    • Locate the trip reset button on the instrument cluster.
    • Press and hold this button down.
  3. Turn the Ignition On:
    • While holding the reset button, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for the Light to Blink:
    • Continue holding the reset button until the maintenance light starts to blink and then turns off.
  5. Release the Button: Once the light is off, release the odometer trip reset button.