FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
384 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the engine is off while performing the reset to prevent accidental movement.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other error messages or warning lights present
  • •Vehicle performance is normal

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Resetting the Maintenance Light

  1. Locate the Odometer Reset Button

    • Find the odometer reset button on the dashboard, usually located near the speedometer.

  2. Press and Hold the Odometer Reset Button

    • Press and hold the button firmly.

  3. Turn the Ignition On

    • While holding the odometer button, turn the ignition key to the "On" position (do not start the engine).

  4. Observe the Maintenance Light

    • Keep holding the button until the maintenance light starts to blink and then turns off.

  5. Turn the Ignition Off

    • Release the odometer button and turn the ignition back to the "Off" position.

  6. Start the Engine

    • Start the vehicle to verify that the maintenance light is no longer illuminated.