FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
343 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a stationary position with the parking brake applied before attempting the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle has undergone recent maintenance (oil change, filter replacement, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure that the vehicle is in a safe area with the parking brake engaged.
  • Gather necessary tools: None required for this procedure.
2. Resetting the Maintenance Light

  1. Turn Off the Ignition

    • Make sure the vehicle is completely off.

  2. Access the Trip Meter

    • Locate and press the "ODO/TRIP" button on the dashboard until the trip meter reads "000000."

  3. Ignition On

    • With the trip meter displayed as "000000," turn the ignition key to the "ON" position (do not start the engine).

  4. Hold the ODO/TRIP Button

    • Keep holding the "ODO/TRIP" button for approximately 10 seconds.
    • Watch for the maintenance light to blink and turn off.

  5. Turn Off the Ignition

    • Release the "ODO/TRIP" button and turn the ignition back to the "OFF" position.