FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
380 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 with this step-by-step guide. Ensure your vehicle's maintenance is accurately indicated.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •No other warning lights are present
  • •Vehicle has undergone scheduled maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ensure the vehicle is parked with the engine off and in a safe location.

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: None required for this process.
  • Ensure the vehicle is parked with the engine off and in a safe location.
2. Resetting the Maintenance Light

  1. Turn Off the Ignition:

    • Ensure the vehicle’s ignition is completely turned off.

  2. Display Odometer:

    • Press the trip meter reset button until the odometer is displayed on the dashboard.

  3. Ignition On:

    • While holding the trip meter reset button, turn the ignition key to the "ON" position (do not start the engine).

  4. Hold Reset Button:

    • Continue to hold the trip meter reset button. Observe the maintenance light on the dashboard.

  5. Check for Flashing Light:

    • The maintenance light should start to flash and then turn off.

  6. Turn Off Ignition:

    • Release the trip meter reset button and turn the ignition off.

  7. Verify Reset:

    • Turn the ignition back on to ensure the maintenance light is no longer illuminated.