how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

396 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or neutral before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle is running normally
•Recent oil change or maintenance performed

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without the engine running.
2
Confirm that the maintenance light is indeed on and not related to other issues.
3
Gather necessary tools for the reset procedure.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the ignition key or key fob ready.

2. Turn the Ignition On

Insert the key into the ignition or press the start button without pressing the brake pedal.
Turn the key to the "ON" position (or press the start button) to illuminate the dashboard lights without starting the engine.

3. Access the Trip Meter

Locate the trip meter button on the dashboard, typically found near the speedometer.
Press the trip meter button until "Trip A" is displayed.

4. Reset the Maintenance Light

While "Trip A" is displayed, turn the ignition off.
Press and hold the trip meter button.
While holding the button, turn the ignition back to the "ON" position (do not start the engine).
Continue holding the button until the maintenance light resets (approximately 10 seconds), and you will see the light blink and then turn off.

5. Finalize

Release the trip meter button.
Turn off the ignition and then turn it back on to verify that the maintenance light is no longer illuminated.