FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on a Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on a Toyota RAV4 Fourth Generation (2013-2018)

how to reset the maintenance light on a Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
334 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 with this step-by-step guide. Quick and easy instructions for a hassle-free reset.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No issues with vehicle performance or operation
  • •Occasional reminders for scheduled maintenance displayed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specialized tools are required for resetting the maintenance light.

Parts Required

  • •None.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe area.
  • Have the vehicle's keys ready.
2. Resetting the Maintenance Light
  1. Turn the ignition switch to "OFF".
  2. Press and hold the odometer reset button located on the instrument panel.
  3. With the odometer button still pressed, turn the ignition switch to the "ON" position (do not start the engine).
  4. Maintain pressure on the odometer reset button until the maintenance light begins to flash and then turns off (approximately 10 seconds).
  5. Release the odometer reset button.
  6. Finally, turn the ignition switch to the "OFF" position to complete the reset process.