how to reset maintenance light on Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

333 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 (2013-2018) with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' if using a key ignition.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Previous maintenance completed (oil change, filter replacement, etc.)

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Trip' button on the dashboard.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue to hold the 'Trip' button until the maintenance light blinks and then turns off.
5
Release the 'Trip' button and turn the ignition back to the 'OFF' position.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the 'Trip' button on the dashboard.
3
Turn the ignition key to the 'ON' position without starting the engine.
4
Continue to hold the 'Trip' button until the maintenance light blinks and then turns off.
5
Release the 'Trip' button and turn the ignition back to the 'OFF' position.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: none required for this reset process.

2. Reset Maintenance Light

Power Off: Turn off the vehicle completely.
Press and Hold: Locate the "Trip" button on the instrument cluster. Press and hold it down.
Turn Ignition On: While holding the "Trip" button, turn the ignition key to the "ON" position (do not start the engine).
Wait for Light to Blink: Keep holding the "Trip" button until the maintenance light blinks and then goes off, indicating the reset is complete.
Release Button: Let go of the "Trip" button.
Turn Ignition Off: Turn the ignition switch back to the "OFF" position.