FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset maintenance light on Toyota RAV4 Fourth Generation (2013-2018)

how to reset maintenance light on Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
386 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Step-by-step guide to ensure your dashboard is clear after maintenance.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position while performing this reset procedure.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No engine performance issues (assuming maintenance is completed)
  • •Potentially overdue maintenance reminder displayed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this reset procedure.
  • Ensure that all required maintenance has been completed prior to resetting the light.
2. Resetting the Maintenance Light

  1. Turn Ignition to ON Position:

    • Insert the key and turn to the "ON" position without starting the engine.

  2. Display Odometer:

    • Ensure the odometer reading is displayed on the instrument panel before proceeding.

  3. Turn Off Ignition:

    • Completely turn off the ignition switch.

  4. Press and Hold Trip Button:

    • Locate the "Trip" button on the instrument panel and press it down. Keep it pressed.

  5. Turn Ignition On:

    • While holding the "Trip" button, turn the ignition back to the "ON" position.

  6. Hold Until Reset:

    • Continue holding the "Trip" button until the maintenance light blinks and resets. You should see dashes (---) on the odometer display.

  7. Release the Button:

    • Once the light is reset, release the "Trip" button.