how to fix the transmission codes P0700-P0799 in my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700-P0799

4 min read

606 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission codes P0700-P0799 in your Toyota RAV4 (2013-2018). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Error Code

P0700-P0799

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission or working on fluid levels.

Symptoms

•Check engine light illuminated
•Erratic shifting or delayed engagement
•Slipping transmission
•Unusual noises during shifting
•Transmission overheating
•Poor acceleration performance

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the presence of P0700 and any additional codes.
2
Inspect transmission fluid level and condition; check for contamination or burnt smell.
3
Examine wiring and connectors related to the transmission control module (TCM) for damage or corrosion.
4
Test the TCM operation using a multimeter to ensure it is functioning correctly.
5
Check for mechanical issues in the transmission by performing a visual inspection of the transmission assembly.
6
Inspect external components such as the throttle position sensor (TPS) and vehicle speed sensor (VSS) that may affect transmission performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Fluid pump

Parts Required

•Transmission fluid (specific to the model)
•Transmission control module (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm the presence of P0700 and any additional codes.
2
Inspect transmission fluid level and condition; check for contamination or burnt smell.
3
Examine wiring and connectors related to the transmission control module (TCM) for damage or corrosion.
4
Test the TCM operation using a multimeter to ensure it is functioning correctly.
5
Check for mechanical issues in the transmission by performing a visual inspection of the transmission assembly.
6
Inspect external components such as the throttle position sensor (TPS) and vehicle speed sensor (VSS) that may affect transmission performance.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, fluid pump, transmission fluid.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts during repairs.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission fluid dipstick and remove it.
2. Check fluid level; if low, add the appropriate type of transmission fluid (consult owner’s manual for specifications).
3. If fluid is dark or smells burnt, proceed to drain and replace the fluid.
4. Use a fluid pump to remove old fluid from the transmission pan.
5. Replace the transmission fluid with fresh fluid, ensuring the correct type and quantity are used.

3. Inspect and Repair Wiring/Connectors

Sub-steps:
1. Inspect the wiring harness leading to the TCM and transmission for any visible damage.
2. Disconnect the connectors and clean them with electrical contact cleaner.
3. Test the continuity of the wires using a multimeter; repair or replace any damaged wiring.
4. Reconnect the harness securely.

4. Test and Replace the Transmission Control Module (if necessary)

Sub-steps:
1. If the TCM is suspected to be faulty, locate it (usually near the transmission).
2. Disconnect the battery and remove the TCM from its mounting.
3. Install a new or refurbished TCM, ensuring proper alignment and secure connections.
4. Reconnect the battery.

5. Clear Codes and Test Drive

Sub-steps:
1. Use an OBD-II scanner to clear all diagnostic trouble codes.
2. Test drive the vehicle under various conditions to ensure smooth shifting and no reoccurrence of codes.
3. Monitor the dashboard for any warning lights.