FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how do I reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

how do I reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
357 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Follow our step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the multi-information display
  • •Potential confusion regarding maintenance intervals

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • None required, just the vehicle key or fob.
2. Reset Maintenance Light

  1. Ensure Vehicle is in the Correct Position

    • Insert the key and turn the ignition to the "ON" position without starting the engine.

  2. Display Odometer Reading

    • Locate the "ODO/TRIP" button on the dashboard.
    • Press and hold the "ODO/TRIP" button until you see the odometer reading on the display.

  3. Turn Off Ignition

    • Turn the ignition switch to the "OFF" position.

  4. Reset the Light

    • While continuing to hold the "ODO/TRIP" button, turn the ignition back to the "ON" position (do not start the engine).
    • Keep holding the button until the maintenance light resets and turns off (typically takes about 10 seconds).

  5. Release the Button

    • Once the light is off, release the "ODO/TRIP" button.