how do I reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

360 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 with this simple step-by-step guide. No tools required.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to prevent rolling while performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•No changes in vehicle performance or operation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the odometer display on the dashboard.
3
Press the trip meter reset button until the display shows 'Trip A.'
4
Turn the ignition off.
5
While holding the trip meter reset button, turn the ignition back to the 'On' position.
6
Keep holding the button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required; manual operation only.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the odometer display on the dashboard.
3
Press the trip meter reset button until the display shows 'Trip A.'
4
Turn the ignition off.
5
While holding the trip meter reset button, turn the ignition back to the 'On' position.
6
Keep holding the button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle in "On" position (do not start the engine).

2. Access the Odometer Display

Locate the trip meter reset button on the dashboard (usually found near the odometer).
Press the trip meter reset button until "Trip A" is displayed.

3. Reset the Maintenance Light

Turn the ignition switch off.
Press and hold the trip meter reset button.
While holding the button, turn the ignition switch to "On" (do not start the engine).
Continue holding the button until the maintenance light blinks and then turns off, usually within 10 seconds.

4. Final Check

Release the trip meter reset button.
Turn the ignition off and then back on to ensure the maintenance light is off.