FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what does it mean when the ABS light is on in my Toyota Highlander XU70 (2020-Present) - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/what does it mean when the ABS light is on in my Toyota Highlander XU70 (2020-Present)

what does it mean when the ABS light is on in my Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
557 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the ABS light issue in Toyota Highlander XU70 (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Always use jack stands when working under a vehicle.

Symptoms

  • •ABS light illuminated on the dashboard
  • •Increased stopping distance during braking
  • •Brake pedal pulsation or unusual behavior
  • •Warning message displayed on the multi-information display
  • •Possible loss of traction control functionality

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Fuse puller tool

Parts Required

  • •ABS fuse (if blown)
  • •ABS wheel speed sensor (if faulty)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and materials: OBD-II scanner, multimeter, socket set, torque wrench.
  • Ensure the vehicle is parked on a level surface and the engine is turned off.
  • Disconnect the negative battery terminal to ensure safety.
2. Inspect and Replace ABS Fuse
  • Locate the fuse box in the engine compartment.
  • Use the fuse puller tool to remove the ABS fuse.
  • Inspect the fuse for continuity with a multimeter; if it is blown, replace it with a new fuse of the same amperage.
3. Check ABS Wheel Speed Sensors
  • Lift the vehicle using a jack and secure it with jack stands.
  • Remove the wheel to access the ABS wheel speed sensor.
  • Disconnect the sensor's electrical connector.
  • Use a multimeter to check sensor resistance; replace the sensor if readings are outside specified range (check service manual for specifications).
  • Reconnect the sensor and wheel.
4. Inspect Brake Fluid Level
  • Locate the master cylinder reservoir.
  • Check the fluid level; if low, top off with the manufacturer-recommended brake fluid.
  • Inspect for any leaks in brake lines or at the wheel cylinders.
5. Evaluate ABS Module and Wiring
  • Visually inspect the ABS module for any signs of moisture or damage.
  • Check the wiring harness connected to the ABS module for fraying or corrosion.
  • If necessary, repair or replace damaged wiring or connectors.
6. Reset ABS Light
  • Reconnect the negative battery terminal.
  • Use the OBD-II scanner to clear any stored ABS error codes.
  • Perform a test drive to ensure the ABS light does not reappear.