FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Highlander XU70 (2020-Present) smells like gas, what could be causing it? - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/my Toyota Highlander XU70 (2020-Present) smells like gas, what could be causing it?

my Toyota Highlander XU70 (2020-Present) smells like gas, what could be causing it?

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
556 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover how to diagnose and fix gasoline smell issues in the 2020-present Toyota Highlander XU70. Step-by-step guide with diagnostic and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on the fuel system.
  • •Work in a well-ventilated area to avoid inhaling gasoline fumes.
  • •Allow the engine to cool before performing any inspections or repairs.

Symptoms

  • •Strong smell of gasoline inside or outside the vehicle
  • •Fuel stains or wet spots on the ground beneath the vehicle
  • •Check Engine light illuminated
  • •Decreased fuel efficiency
  • •Engine misfires or rough idling
  • •Fuel gauge reading inconsistencies

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Screwdriver set
  • •Flashlight

Parts Required

  • •New fuel lines (if damaged)
  • •New fuel injector seals (if leaking)
  • •New fuel cap (if damaged)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Park the vehicle on a flat surface and ensure the engine is off and cool.
  • Disconnect the negative battery terminal to prevent electrical issues.
2. Inspect and Replace Fuel Lines
  • Inspect Fuel Lines:
    • Use a flashlight to inspect the fuel lines from the tank to the engine for cracks or wear.
  • Replace Damaged Lines:
    • If damage is found, use a socket set to disconnect the old fuel lines at both ends.
    • Install new fuel lines ensuring they are routed correctly and secured with clamps.
    • Torque specifications: Follow the manufacturer's guidelines for proper torque values.
3. Check and Replace Fuel Injector Seals
  • Remove Engine Cover:
    • If necessary, remove the engine cover using a socket set.
  • Inspect Fuel Injectors:
    • Check the fuel injectors for signs of leakage around the seals.
  • Replace Seals:
    • Remove the fuel injectors if leaking.
    • Clean the injector ports and install new seals.
    • Reinstall injectors and ensure they are securely locked in place.
4. Inspect and Replace Fuel Cap
  • Check Fuel Cap:
    • Inspect the fuel cap for cracks or wear.
  • Replace if Necessary:
    • If damaged, replace with a new OEM fuel cap to ensure a proper seal.
5. Reconnect Battery and Test
  • Reconnect the negative battery terminal.
  • Start the engine and check for fuel odors.
  • Monitor for leaks around the repaired areas.